I like the way that the rose turned out on this panel. The rose has both padded and dimensional petals, and the pear is padded silk shading over 3 layers of felt.
As I was working on the different panels the next stage was to add things like pearls, acorn caps and blueberries over the embroidered flat or padded elements on the fabric.
Next to be stitched was all of the detached petals, leaves and other parts. They needed to have the pattern traced on another piece of fabric. The wire was basted down and then I colored the wire and fabric with a Copic pen. This was done so that when I cut it out, any of the fabric threads that I couldn't quite get cut off would disappear and if the wire was not completely covered it did not show. I used various techniques to fill in the shapes. A few were padded with string but mostly they were just stitched and shaded. After all of the stitching was done, I put a very thin layer of acid free glue on the back so that they were more stable when they were cut out.The ends of the wire were either just inserted into the fabric or wrapped with silk to make a stem before they were put into place. The ends on the back were bent down, couched to the lining fabric and then trimmed off. At this point the flowers, leaves and other elements were carefully bent to the required shape.
Finally, I added flower centers, any other small details and then the gold pearl purl and spangles to the panel. Time to celebrate, the embroidery was finished. The photos at the start of each of the posts are of the finished panels.
Now all of that work was done, I could start to put it together. I picked a soft gold silk taffeta for the lining and the inside bag. The stiffening is a combination of 7 and 10mm quilt template plastic. I wanted something that was thin but rigid and would not get crushed. For most of my small, shaped boxes or houses, I use comic board or Skirtex® to create the shape. I could not do that with this piece since the petals flex a little and if board gets bent it will stay that way and mis-shaped petals would spoil the whole bag.
Now all of that work was done, I could start to put it together. I picked a soft gold silk taffeta for the lining and the inside bag. The stiffening is a combination of 7 and 10mm quilt template plastic. I wanted something that was thin but rigid and would not get crushed. For most of my small, shaped boxes or houses, I use comic board or Skirtex® to create the shape. I could not do that with this piece since the petals flex a little and if board gets bent it will stay that way and mis-shaped petals would spoil the whole bag.
No comments:
Post a Comment